- Water based formula
- Cleans up with water
- Removes dirt and dust
PREPARATION
1. Sweep away leaves, dirt and debris.
2. Hose down timber surface, ensuring surface is damp prior to application.
APPLICATION
Apply with a broom
1. Shake contents before use.
2. Hose down timber surface, ensuing surface is damp prior to any application of Cabot’s Deck Clean.
3. Test on a small area to determine effectiveness and strength required.
4. Add one part Cabot’s Deck Clean to four parts water in a Cabot’s Deck Hand bucket and mix well. For stubborn stains use a stronger solution.
5. Apply generously to the timber with a brush or broom. Scrub vigorously.
6. Leave the solution on the timber for 10-20 minutes.
7. Rinse off the surface with water using a high pressure or garden hose. Avoid allowing to dry out. Severely stained decks may need an additional treatment, more vigorous scrubbing or a power washer. Important: In hot temperatures do not apply in direct sunlight, cool the timber by lightly dampening with water and coat in the shade. Hints: Cabot’s Deck Clean is not a paint remover, however it may remove some old and weathered coatings from timber.