Ecolour Polyclear Surface Sealer – Zero VOC

Ecolour Polyclear Surface Sealer – Zero VOC
Ecolour Polyclear Surface Sealer – Zero VOC

Ecolour Polyclear Surface Sealer – Zero VOC

Size
Regular price $28.00
/
  • Australia Wide Delivery
  • Quality Guaranteed
  • Expert Advise Available
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Tax included. Shipping calculated at checkout.

Description
Ecolour Polyclear is a unique and tough hard surface sealer that provides maximum protection. It provides a clear, hard finish for timber and concrete.

Recommended Uses
Suitable for interior timber, including; doors, trim work, furniture, window frames and paneling. Suitable for timber and concrete internal floors. Not suitable for surfaces where water can form puddles as it may appear milky until water dries.

Colours
Can be tinted to many opaque colours.

Coverage
16sqm/L on smooth surfaces (10sqm/L on rough, untreated surfaces).

Application Advice
Ensure surfaces to be painted are clean and free of dust, dirt, mould, grease, contaminants and any flaking or blistering finishes. Fill any cracks or holes with a suitable filler. Previously finished surfaces need to be cleaned with an etch cleaner, such as Gloss Off, to ensure adhesion. Three coats are recommended for floors, two coats are recommended for all other surfaces.  Even if surface feels dry to touch, with flooring we recommend 3 to 4 days of drying before returning furniture with felt pads on table and chair legs, allow at least a week if no felt pads.  We recommend waiting up to a month before laying rugs (Polyclear needs to be fully cured).

Stir well with a broad flat stirrer to a relatively even consistency. Do not apply in temperatures below 10ºC or above 35ºC. When applying in hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting or thin the paint with 100ml of water per litre.

Ecolour Polyclear can be applied by roller, brush or spray gun. Apply 1 generous coat making sure the surface is covered thoroughly and evenly. Touch dry in 30 minutes. Allow 2 hours before applying top coats or longer in humid, cold or damp conditions.

Care and Maintenance
Polyclear will provide a clear, scrubbable surface that can be wiped clean with a damp cloth. Surface scratches can be repaired by cutting back and re-coating.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from Interior Paint
Sold Out
Ecolour Polyclear Surface Sealer – Zero VOC
Ecolour
from $28.00
Ecolour Wet Area Satin Paint – Zero VOC
Ecolour
from $40.00
Ecolour Econamel Paint – Zero VOC - GLOSS
Ecolour
from $40.00
Ecolour Econamel Paint – Zero VOC - SATIN
Ecolour
from $40.00
Ecolour Eco Living Interior Paint – Zero VOC - SATIN
Ecolour
from $39.00
Ecolour Primer Undercoat Paint – Zero VOC
Ecolour
from $35.00
Recently viewed