Feast Watson 125g Brown Hard Wax
- Fills fine scratches
- Brown semi gloss finish
- Stronger protection for timber
A premium brown carnauba wax that is easy to apply to interior coated surfaces. It protects, rejuvenates and enhances the natural beauty of fine timber whist imparting a lustrous sheen. Recommended on darker interior timbers.
PREPARATION
How to prepare my furniture for Feast Watson Hard Wax:
Ensure the surface of the sealed timber is clean and dry before applying Hard Wax.
Sweep sealed floors and clean with Feast Watson Floorclean
Are you using Hard wax on bare timber?
If so, ensure the surface has been sanded with fine paper prior to application and is clean and free from sanding dust.
APPLICATION
How to apply Feast Watson Hard Wax:
Achieve your newly polished furniture with these easy steps:
Apply a thin even coating of Wax using a soft dry cloth or pad.
Allow 5 minutes to dry - go make yourself a coffee!
Once dry, buff the surface until you are happy with the sheen level.
- Where a soft sheen is required on sealed timber, apply with 000 or 0000 steel wool, using light pressure and rubbing with the grain. Then buff to an even soft sheen using a clean, dry soft, cloth.
TIP: when using Wax on timber floorboards, a buffing machine and dry pad are recommended as a machine will generate more heat which enables the surface to set harder. Many coatings will be required on bare timber to achieve a durable finish.
Looking to make a creamy floor polish?
Immerse the Wax container in hot water to melt wax.
Add 250mls of pure turpentine per 125 grams of Wax until the desired consistency is achieved.
Apply a thin even coating using a soft dry cloth or Feast Watson Applicator and Floor Care Polish Sock.
Allow 5 minutes to dry then buff to desired sheen level.
- A buffing machine and dry pad will make buffing easier but the job can also be done with a clean dry cloth or Polish Sock.
MAINTENANCE
How to maintain my furniture after using Feast Watson Hard Wax:
How to maintain your floors:
To rejuvenate tired, worn floors, apply one coat of Hard Wax and buff to desired sheen level.
Old layers of Hard Wax can be stripped from floors using Mineral Turpentine.
How to maintain your furniture:
Ensure the surface of the sealed timber is clean and dry before applying Hard Wax.
To rejuvenate tired surfaces, apply one coat of Hard Wax and buff to desired sheen level.
- Old layers of Hard Wax can be stripped from timber using Mineral Turpentine.
PREPARATION
How to prepare my furniture for Feast Watson Hard Wax:
Ensure the surface of the sealed timber is clean and dry before applying Hard Wax.
Sweep sealed floors and clean with Feast Watson Floorclean
Are you using Hard wax on bare timber?
If so, ensure the surface has been sanded with fine paper prior to application and is clean and free from sanding dust.
APPLICATION
How to apply Feast Watson Hard Wax:
Achieve your newly polished furniture with these easy steps:
Apply a thin even coating of Wax using a soft dry cloth or pad.
Allow 5 minutes to dry - go make yourself a coffee!
Once dry, buff the surface until you are happy with the sheen level.
- Where a soft sheen is required on sealed timber, apply with 000 or 0000 steel wool, using light pressure and rubbing with the grain. Then buff to an even soft sheen using a clean, dry soft, cloth.
TIP: when using Wax on timber floorboards, a buffing machine and dry pad are recommended as a machine will generate more heat which enables the surface to set harder. Many coatings will be required on bare timber to achieve a durable finish.
Looking to make a creamy floor polish?
Immerse the Wax container in hot water to melt wax.
Add 250mls of pure turpentine per 125 grams of Wax until the desired consistency is achieved.
Apply a thin even coating using a soft dry cloth or Feast Watson Applicator and Floor Care Polish Sock.
Allow 5 minutes to dry then buff to desired sheen level.
- A buffing machine and dry pad will make buffing easier but the job can also be done with a clean dry cloth or Polish Sock.
MAINTENANCE
How to maintain my furniture after using Feast Watson Hard Wax:
How to maintain your floors:
To rejuvenate tired, worn floors, apply one coat of Hard Wax and buff to desired sheen level.
Old layers of Hard Wax can be stripped from floors using Mineral Turpentine.
How to maintain your furniture:
Ensure the surface of the sealed timber is clean and dry before applying Hard Wax.
To rejuvenate tired surfaces, apply one coat of Hard Wax and buff to desired sheen level.
- Old layers of Hard Wax can be stripped from timber using Mineral Turpentine.
You may also like
More from Feast Watson
More from Home page
Recently viewed
